Water Well Repair in Midland & Odessa
When an existing well stops performing the way it used to. Tell us what changed and we’ll help you get it sorted.
Midland County · Ector County · Surrounding communities
Is it the well, or the equipment in it?
Most people call about a well when what has actually failed is a pump, a switch or a tank. That’s worth knowing, because the two lead to very different jobs. Equipment problems are usually repairable in a visit. Problems with the well itself are a bigger conversation.
The most useful clue is whether the problem tracks with how much water you use. A pressure switch doesn’t care how much water the household draws, and it fails the same way every time. A well that’s struggling behaves differently: fine first thing, weaker through the day, better again by morning.
Pressure is strong in the morning and gone by evening
Classic drawdown pattern. The well is recovering overnight and not keeping up with daily demand.
Water has turned cloudy, gritty or sandy
Something has changed in the borehole, or the pump is drawing from lower than it used to.
Yield has dropped off gradually over months or years
Wells lose capacity as the screen and surrounding formation foul up. Often recoverable.
The water smells or tastes different than it did
Worth investigating rather than filtering. A change usually has a cause.
Air spits from the taps
Commonly a leak in the drop pipe or a failed check valve. Equipment, not the well.
The wellhead or casing looks damaged
A compromised cap or casing is a contamination route into your water supply. Don’t leave it.
What water well repair covers
Repair work on the well itself falls into a few broad categories, and which one applies is usually settled by an inspection rather than a guess.
Restoring lost yield
Wells silt up and the formation around the screen becomes fouled over time. Cleaning and reworking a well can recover capacity that has been lost gradually, and it’s almost always cheaper than drilling a replacement.
Casing and wellhead repairs
The casing keeps the borehole open and keeps surface water out. A damaged cap, a corroded pitless adapter or compromised casing is both a performance problem and a contamination risk.
Sediment and grit
Grit in the water wears out pumps fast. Fixing it means finding out why the well started producing sediment, not just filtering it downstream.
Setting depth and pump position
If the water level has changed, a pump set at the wrong depth will either draw air or sit in sediment. Repositioning is sometimes all that’s needed.
If it turns out the equipment is at fault rather than the well, the relevant pages are well pump repair and pressure tank repair.
Not sure which it is?
Describe what changed and roughly when. That’s usually enough to point it in the right direction before anyone drives out.
What moves the price of a well repair
Whether the well or the equipment failed
By far the biggest fork in the road. Equipment work is bounded and predictable. Work on the borehole itself is not, until someone has looked.
Depth and construction
How deep the well is, how it was cased, and how well it was built. Older wells with unknown construction carry more uncertainty.
What has to come out of the hole
If the pump and drop pipe must be pulled to reach the problem, that labour lands on the bill regardless of what’s found.
Whether rehabilitation is viable
Restoring an existing well is usually far cheaper than drilling a new one, but not every well is a candidate, and it takes an inspection to know.
Site access
What equipment can reach the wellhead, and what’s in the way. Acreage properties differ enormously here.
Note: we don’t publish dollar figures we can’t stand behind. Pricing guidance can only be provided after a proper consultation.
Related services
Well Pump Repair
Short-cycling, air in the lines, or a pump running without producing water.
Water Well Inspection
The step that settles whether a well is worth rehabilitating.
Water Well Drilling
When an existing well has reached the end of what repair can do.
Questions people ask about well repair
The quickest way to tell them apart is whether the problem tracks with usage. Equipment faults tend to be consistent and often electrical, appearing the same way every time. Well problems tend to track with demand and recovery, so pressure holds up in the morning and falls away after heavy use. A provider confirms this by measuring the standing water level and watching how fast it draws down.
Sediment usually means the pump is drawing from lower in the well than it used to, or that something has changed in the borehole. It is worth attention rather than a filter, because grit moving through a pump wears it out quickly and the underlying cause does not fix itself.
Often, yes. Wells lose yield over time as the screen or the formation around it becomes fouled, and cleaning or reworking the well can restore some of that. Whether it is worth doing depends on the construction and condition of the well, which is what an inspection is for.
The well itself commonly outlasts several pumps. Casing, grouting and construction quality matter more than age alone, and a well that was built well and maintained will keep producing long after the equipment inside it has been replaced more than once.
Tell us what’s going on with your well
Describe the problem in a sentence or two. We’ll take it from there.