Water Well Drilling in Midland, Odessa & West Texas
New residential, ranch and irrigation wells. Tell us about the property and we’ll help you get the project moving.
Residential · Ranch & livestock · Irrigation
When drilling a new well is the right call
Drilling is the largest single investment in a private water supply, so it’s worth being clear about when it’s actually the answer, and when repairing what’s already there would serve you better.
A new well usually makes sense when there’s no well on the property at all, when an existing well has genuinely reached the end of its useful life, or when demand has outgrown what the current well can deliver. It rarely makes sense as a response to a pump problem, which is a much smaller and cheaper category of work.
The property has no well
New build, subdivided acreage, or land that has never been developed.
The existing well can’t be rehabilitated
Worth confirming with an inspection before committing to a new hole.
Demand has outgrown the well
More household, irrigation added, or livestock numbers up. The well may simply be too small.
Water quality has deteriorated permanently
Where the cause is the well construction or its position rather than something treatable.
The casing has failed
A compromised casing can be beyond economical repair, particularly on older wells.
You need water somewhere else on the property
A second well for irrigation, livestock or a new building well away from the existing one.
Before you drill
If there’s an existing well on the property, an inspection is usually worth doing first. Rehabilitating a well is almost always cheaper than replacing it, and the inspection tells you whether that’s on the table.
How a residential water well gets drilled
Siting and records
Choosing where the well goes, using records of nearby wells and the formations beneath the property. Setbacks from septic systems, property lines and structures constrain the options.
Permitting and registration
Requirements depend on the property’s location and which groundwater conservation district covers it, if any. A local driller confirms what applies to your specific address.
Drilling and casing
The borehole is drilled and cased to keep it open and keep surface water out. Casing and grouting are what separate a well that lasts decades from one that gives trouble.
Development and testing
The well is cleaned up and its yield measured. That figure is what the pump then gets sized against. Skip it and the pump specification is guesswork.
Pump and pressure system
Pump set at the correct depth, drop pipe, wiring, pitless adapter, pressure tank and switch. A meaningful share of the total project cost sits in this stage, not the drilling.
Connection and handover
Tying into the property’s plumbing and electrical, then testing the whole system under real demand. Keep the well log and pump specification. You’ll want them in ten years.
What affects well drilling cost in West Texas
Depth: the dominant factor
Priced per foot, so total depth drives the total more than anything else. It varies significantly between properties in this region, which is why a neighbour’s figure is a poor guide to yours.
Casing and construction
Diameter, casing material and grouting. This is not the place to economise, because construction quality is what determines whether the well is still sound decades from now.
The pump and pressure system
A substantial share of the project, and separate from the drilling itself. Sized against the well’s tested yield and the property’s demand.
Electrical work
Getting power to the wellhead. On acreage properties a long run from the nearest supply is a real line item.
Site access
Whether a drilling rig can reach the chosen spot, what has to be crossed to get there, and how much site preparation is needed.
Permitting and reporting
Varies with the property’s location and the district covering it.
Note: we don’t publish dollar figures we can’t stand behind. Pricing guidance can only be provided after a proper consultation. Anyone quoting a firm total before seeing the property is guessing.
Residential, ranch and irrigation wells
Most wells drilled around Midland and Ector counties serve a house on acreage. But the same providers drill for other purposes, and the specification changes considerably with the job.
Residential
A household supply, sized against fixtures and peak simultaneous demand. The most common type of well on properties outside the city limits here.
Ranch and livestock
Often prioritises steady, reliable delivery over peak flow, and may sit well away from any building, which makes power supply and site access central to the planning.
Irrigation
Sustained high flow over long periods. Yield testing matters more here than anywhere else, because irrigation will find the limit of a well faster than a household ever will.
What to tell us
Roughly what the well is for, the property location, and whether there’s an existing well. That’s enough to get it moving.
Related services
Water Well Inspection
Worth doing first if there’s already a well on the property.
Well Pump Replacement
Pump specification and installation, a significant part of any new well project.
Water Well Repair
Often the cheaper answer when an existing well is underperforming.
Questions people ask about drilling
Drilling is usually quoted by the foot, so depth is the single biggest factor in the total. After that, cost is driven by casing, the pump and motor selected, the pressure system, the electrical work, and how easily equipment can reach the site. Because depth is not known with certainty before drilling starts, a responsible quote explains what is fixed and what varies rather than presenting one number.
Depth varies a great deal from property to property, even between neighbours. A driller working your area sizes a new well from the records of nearby wells and the formation being targeted, which is why a site-specific answer is worth far more than a regional average.
Requirements depend on where the property sits and which groundwater conservation district, if any, covers it. Registration and reporting obligations also apply to the driller. This is one of the first things a local driller will confirm for your specific address, because they deal with the relevant authority routinely.
The drilling itself is often a matter of days rather than weeks, but the full project runs longer: siting, any permitting, drilling, casing and development, then installing the pump, pressure system and electrical. Weather and rig availability affect the schedule as much as the work does.
Tell us what’s going on with your well
Describe the problem in a sentence or two. We’ll take it from there.